P3753 Heavy Duty Insert

P3753 Heavy Duty Insert

• Standard Length: 300mm
• Finish: Hot Dipped Galvanised.
• Loading Data: Because the support capacity of any Concrete Insert
  depends largely on the strength of the concrete used, Atkore and
  Unistrut® can not guarantee any particular load.
• Recommended Pullout Loading*: 22kN per 300mm.
  Recommended Loading*: The recommended design load is based
  on using two P1010 nuts at no less than 75mm O.C. and no closer
  than 50mm to either end of the insert. The distance between the
  insert centerline and the concrete edge must be a minimum of
  75mm.